Amd Geode SC2200 Manual do Utilizador Página 346
- Página / 429
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
358 AMD Geode™ SC2200 Processor Data Book
Video Processor Module - Video Processor Registers - Function 4
32580B
10 Auto-Flip. Video port operation mode.
0: The video port automatically detects the even and odd fields based on the VP_HREF and VP_VSYNC_IN signals or the
CCIR656 control codes.
1: The even/odd field detect logic is disabled and the video port automatically toggles between the even and odd buffers
during capture. The odd buffer is the first to be filled in this mode.
This bit must be programmed to 0 when Direct Video mode is used. Direct Video mode is used when VID_SEL = 10
(F4BAR0+Memory Offset 400h[1:0]). Otherwise the video select from the GX1 module. VID_SEL indicates the source of the
video data.
9 Capture (Store to Memory) VBI Data.
0: Disable.
1: Enable.
8 Capture (Store to Memory) Video Data.
0: Disable.
1: Enable.
7:2 Reserved. Must be set to 0.
1:0 Run Mode Capture. Selects capture run mode.
00: Stop capture at end of current line.
01: Stop capture at end of current field.
10 Reserved.
11: Start capture at beginning of next field.
Offset 08h-0Bh Video Interface Status Register (R/W) Reset Value: xxxxxxxxh
31:25 Reserved. (Read Only)
24 Current Field. (Read Only)
0: Even field is being processed.
1: Odd field is being processed.
23:22 Reserved. (Read Only)
21 Base Register Not Updated. (Read Only) When set to 1, this bit indicates that one of the base registers (at
F4BAR2+Memory Offset 20h, 24h, 40h, and 44h) has been written but has not yet been updated.
0: All base registers are updated.
1: One or more of the base registers has not been updated.
20 FIFO Overflow Status Indication.
0: No overflow occurred.
1: An overflow occurred for the FIFO between the VIP and the Fast X-Bus.
Writing a 1 to this bit clears the status.
19:18 Reserved. (Read Only)
17 Line Interrupt (INTC#) Pending Status.
0: Interrupt not pending.
1: Interrupt pending.
Writing a 1 to this bit clears the status.
16 Field Interrupt (INTC) Pending Status.
0: Interrupt not pending.
1: Interrupt pending.
Writing a 1 to this bit clears the status.
15:10 Reserved. (Read Only)
9 VBI Data Capture Active. (Read Only)
0: VBI data is not being stored to memory.
1: VBI data is now being stored to memory.
Table 7-8. F4BAR2+Memory Offset: VIP Configuration Registers (Continued)
Bit Description
- AMD Geode™ SC2200 Processor 1
- Data Book 1
- Contents 3
- List of Figures 5
- List of Tables 10
- 1.0Overview 13
- 1.2 Features 14
- Overview 16
- 2.0Architecture Overview 17
- 2.2 Video Processor Module 22
- 2.3 Core Logic Module 23
- 2.4 SuperI/O Module 23
- 2.5.1 Reset Logic 24
- 3.0Signal Definitions 25
- Signal Definitions 26
- 3.1 Ball Assignments 27
- SC2200 Processor 28
- 3.2 Strap Options 43
- 3.4 Signal Descriptions 48
- 3.4.9 IDE Interface Signals 59
- 3.4.16 GPIO Interface Signals 66
- (Continued) 69
- Reserved - RSVD 78
- 4.3 WATCHDOG 79
- 4.3.2 WATCHDOG Registers 80
- 4.4 High-Resolution Timer 81
- 4.5 Clock Generators and PLLs 83
- Circuitry 84
- Default ADL Multiplier 85
- 0111 33.33 4 0100 133 85
- 4.5.4 SuperI/O Clocks 86
- 4.5.6 Video Processor Clocks 86
- 4.5.7 Clock Registers 87
- 5.0SuperI/O Module 89
- 5.1 Features 90
- 5.2 Module Architecture 91
- 5.3.4 Address Decoding 93
- Configuration 98
- SuperI/O Module 100
- 5.5 Real-Time Clock (RTC) 105
- 5.5.3 RTC Registers 111
- Table 5-19. RTC Register Map 111
- Table 5-20. RTC Registers 111
- Table 5-25. Extended RAM Map 115
- Table 5-24. Standard RAM Map 115
- 5.6.1 Event Detection 116
- Type Name 117
- Type Name 117
- 5.7 ACCESS.bus Interface 121
- 5.7.3 Acknowledge (ACK) Cycle 122
- 5.7.6 Arbitration on the Bus 123
- 5.7.7 Master Mode 123
- 5.7.8 Slave Mode 125
- 5.7.9 Configuration 125
- 5.8 Legacy Functional Blocks 129
- Offset Name 130
- 404h EDR Data Bits 130
- Architecture 131
- Table 5-43. Bank 1 Bit Map 134
- Table 5-44. Bank 2 Bit Map 134
- Table 5-45. Bank 3 Bit Map 134
- Port 3 (SP3) Functionality 135
- Table 5-56. Bank 1 Bit Map 139
- Table 5-57. Bank 2 Bit Map 139
- Table 5-58. Bank 3 Bit Map 139
- Table 5-59. Bank 4 Bit Map 139
- Table 5-60. Bank 5 Bit Map 140
- Table 5-61. Bank 6 Bit Map 140
- Table 5-62. Bank 7 Bit Map 140
- 6.0Core Logic Module 141
- 6.2 Module Architecture 142
- 6.2.2 PSERIAL Interface 143
- 6.2.3 IDE Controller 144
- Core Logic Module 146
- 6.2.4 Universal Serial Bus 147
- 6.2.5 Sub-ISA Bus Interface 147
- 6.2.6 AT Compatibility Logic 152
- Figure 6-7. PIT Timer 154
- 6.2.8 Keyboard Support 157
- C1 Power State - Active Idle 158
- Sleep States 160
- 6.2.11 GPIO Interface 167
- 6.2.12 Integrated Audio 167
- AMD Geode™ 170
- Processor 170
- SMI# (System Management 171
- Read to Clear 172
- Figure 6-15. Typical Setup 173
- Table 6-12. Cycle Types 174
- 6.3 Register Descriptions 175
- 6.3.2 Register Summary 176
- 6.4 Chipset Register Space 190
- CPI mode 202
- . Reads as 0 220
- 20h and 24h) 221
- 1), this bit allows signal 230
- Not Used Reset Value: 00h 244
- . Must be set to 0 252
- 0 Reserved. (Read Only) 260
- Not Used 269
- : X-Bus Expansion Registers 278
- 00h/02h[14] 278
- Reserved Reset Value = xxh 291
- 7.0Video Processor Module 307
- 7.1 Module Architecture 308
- 7.2 Functional Description 309
- (Not normally User Data) 310
- Figure 7-4. VIP Block Diagram 311
- Video Processor Module 312
- 7.2.2 Video Block 315
- 7.2.3 Mixer/Blender Block 318
- Windows Configuration 321
- 7.2.5 Integrated DACs 323
- 7.2.6 TFT Interface 324
- crystal oscilla 325
- 7.3 Register Descriptions 326
- 8.0Debugging and Monitoring 349
- Debugging and Monitoring 350
- 9.0Electrical Specifications 351
- 9.1.4 Operating Conditions 352
- 9.1.5 DC Current 353
- Electrical Specifications 354
- 9.2 DC Characteristics 358
- 9.3 AC Characteristics 363
- GX1 Processor Series Data 365
- 9.3.2 Video Port 367
- 9.3.3 CRT and TFT Interface 368
- 9.3.4 ACCESS.bus Interface 370
- Note 2. t 371
- Ω1 KΩ 10 pF 373
- Figure 9-18. PCI Reset Timing 378
- 9.3.6 Sub-ISA Interface 379
- 9.3.7 LPC Interface 383
- 9.3.8 IDE Interface 384
- 9.3.11 Fast IR Port 407
- 9.3.13 Audio Interface (AC97) 412
- 9.3.14 Power Management 417
- 9.3.15 Power-Up Sequencing 418
- 9.3.16 JTAG Interface 420
- 10.0Package Specifications 423
- Figure 10-1. Heatsink Example 424
- 10.2 Physical Dimensions 425
- Package Specifications 426
- A.1 Order Information 427
- Table A-1. Revision History 428
Manuais e produtos relacionados com Hardware Amd Geode SC2200
Hardware Amd GA-K8NSC-939 Manual do Utilizador
(80 páginas)
(80 páginas)
Hardware Amd Athlon 27493 Manual do Utilizador
(104 páginas)
(104 páginas)
Hardware Amd CrossFire 480X Manual do Utilizador
(16 páginas)
(16 páginas)
Hardware Amd AN9 32X Manual do Utilizador
(76 páginas)
(76 páginas)
Hardware Amd ATI RADEON HD 2600 Manual do Utilizador
(62 páginas)
(62 páginas)
Hardware Amd Turion 64 X2 Manual do Utilizador
(2 páginas)
(2 páginas)
Hardware Amd ATI RADEON HD 2400 Manual do Utilizador
(64 páginas)
(64 páginas)
Hardware Amd 1207 Manual do Utilizador
(62 páginas)
(62 páginas)
Hardware Amd LV-651 Manual do Utilizador
(50 páginas)
(50 páginas)
Hardware Amd Turion 64 Manual do Utilizador
(3 páginas)
(3 páginas)
Hardware Amd GA-K8N51GMF Manual do Utilizador
(88 páginas)
(88 páginas)
Hardware Amd LE-363 Manual do Utilizador
(45 páginas)
(45 páginas)
Hardware Amd Athlon 6 Manual do Utilizador
(19 páginas)
(19 páginas)
Hardware Amd GA-K8N51GMF-9 Manual do Utilizador
(80 páginas)
(80 páginas)
Hardware Amd Phenom II Manual do Utilizador
(6 páginas)
(6 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais