AMD LE-363 User's Guia do Utilizador descarregar pdf (Página 203)

100

101

Chapter 8 Virtual Host Bus Adapters (vHBAs) 177

2. Delete all the vHBAs terminated on the port for which you will change the port

topology.

For example:

3. If you do not want to delete the vHBAs, you can do the following steps:

a. Set the vHBAs on the port to “down” state

b. Set the interface to “none”

c. Make the port topology change

d. Disconnect the fibre channel cable, then reconnect the fibre channel cable

e. Set the interface on the vHBAs back to this port.

4. Disconnect the fibre channel cable that will be connected to the new topology.

5. Set the new port topology type.

For example, assume that port 9/2 will be changed from f-port to l-port:

6. Reconnect the fibre channel cable to the port with the new topology.

7. Add the deleted vHBAs back to the port.

For example, to add vHBAs to port 9/2:

For vNIC-to-vNIC Switching to be successful, the port’s Access VLAN

(sometimes called the native VLAN) must be a non-default value.

remove vhba vh3.frick

remove vhba vhsan.brack-sanboot

set fc-port 9/2 -topology=l-port

add vhba vh3.frick 9/2

add vhba vhsan.brack-sanboot 9/2

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 435 436

Comentários a estes Manuais

Sem comentários

AMD LE-363 User's Guia do Utilizador Página 203

Comentários a estes Manuais