
20 Electrical Data Chapter 6
AMD Duron™ Processor Data Sheet 23802E—September 2000
Preliminary Information
6.3 Voltage Identification (VID[4:0])
Table 4 shows the VID[4:0] DC characteristics. For more
information, see “VID[4:0] Pins” on page 61.
6.4 Frequency Identification (FID[3:0])
Table 5 shows the FID[3:0] DC characteristics. For more
information, see “FID[3:0] Pins” on page 58.
Test
PLLTEST#, PLLMON1, PLLMON2, SCANCLK1, SCANCLK2,
SCANSHIFTEN, SCANINTEVAL, ANALOG
These pins must be pulled down to
VSS. See “General AC and DC
Characteristics” on page 27.
Miscellaneous PLLBYPASS#, DBREQ#, DBRDY, PWROK
See “General AC and DC
Characteristics” on page 27.
Table 3. AMD Duron™ Processor Interface Signal Groupings (continued)
Signal Group Signals Notes
Table 4. VID[4:0] DC Characteristics
Parameter Description Min Max
I
OL
Output Current Low TBD
V
OH
Output High Voltage 2.5 V*
Note:
* The VID pins must not be pulled above this voltage by an external pullup resistor.
Table 5. FID[3:0] DC Characteristics
Parameter Description Min Max
I
OL
Output Current Low TBD
V
OH
Output High Voltage 2.5 V*
Note:
* The FID pins must not be pulled above this voltage by an external pullup resistor.
Comentários a estes Manuais